Publicaciones en las que colabora con Jean-Michel Mermet (33)

2014

  1. Quantification of nickel, vanadium and manganese in petroleum products and biofuels through inductively coupled plasma mass spectrometry equipped with a high temperature single pass spray chamber

    Journal of Analytical Atomic Spectrometry, Vol. 29, Núm. 2, pp. 242-248

2013

  1. Determination of trace elements in petroleum products by inductively coupled plasma techniques: A critical review

    Spectrochimica Acta - Part B Atomic Spectroscopy, Vol. 88, pp. 104-126

2012

  1. Universal calibration for metal determination in fuels and biofuels by inductively coupled plasma atomic emission spectrometry based on segmented flow injection and a 350 °c heated chamber

    Journal of Analytical Atomic Spectrometry, Vol. 27, Núm. 6, pp. 937-945

2010

  1. Air-segmented, 5-μL flow injection associated with a 200 °c heated chamber to minimize plasma loading limitations and difference of behaviour between alkanes, aromatic compounds and petroleum products in inductively coupled plasma atomic emission spectrometry

    Journal of Analytical Atomic Spectrometry, Vol. 25, Núm. 12, pp. 1888-1894

  2. Effect of solvent dilution on the ICP-AES based silicon sensitivity, the aerosol characteristics and the resulting organic solution properties in the analysis of petroleum products

    Journal of Analytical Atomic Spectrometry, Vol. 25, Núm. 2, pp. 178-185

  3. Influence of nebulizer design and aerosol impact bead on analytical sensitivities of inductively coupled plasma mass spectrometry

    Spectrochimica Acta - Part B Atomic Spectroscopy, Vol. 65, Núm. 11, pp. 908-917

  4. Influence of the operating parameters and of the sample introduction system on time correlation of line intensities using an axially viewed CCD-based ICP-AES system

    Spectrochimica Acta - Part B Atomic Spectroscopy, Vol. 65, Núm. 2, pp. 137-146

2009

  1. Effect of the silicon chemical form on the emission intensity in inductively coupled plasma atomic emission spectrometry for xylene matrices

    Journal of Analytical Atomic Spectrometry, Vol. 24, Núm. 4, pp. 391-401

  2. Heated-spray chamber-based low sample consumption system for inductively coupled plasma spectrometry

    Journal of Analytical Atomic Spectrometry, Vol. 24, Núm. 7, pp. 903-910

  3. Minimization of the effect of silicon chemical form in xylene matrices on ICP-AES performance

    Journal of Analytical Atomic Spectrometry, Vol. 24, Núm. 10, pp. 1382-1388

2008

  1. Liquid Sample Introduction in ICP Spectrometry

    Elsevier

  2. Liquid Sample Introduction in ICP Spectrometry: A Practical Guide

    Elsevier, pp. 1-289

2007

  1. Study of the absence of recondensation with low liquid delivery rates by using a cavity sheathing gas in inductively coupled plasma-atomic emission spectrometry

    Journal of Analytical Atomic Spectrometry, Vol. 22, Núm. 5, pp. 523-531

2006

  1. Sample introduction systems for the analysis of liquid microsamples by ICP-AES and ICP-MS

    Spectrochimica Acta - Part B Atomic Spectroscopy, Vol. 61, Núm. 3, pp. 239-283

2005

  1. Elemental analysis of liquid microsamples through inductively coupled plasma spectrochemistry

    TrAC - Trends in Analytical Chemistry, Vol. 24, Núm. 2, pp. 107-116

2004

  1. Compensation for matrix effects in ICP-AES by using air segmented liquid microsample introduction. the role of the spray chamber

    Journal of Analytical Atomic Spectrometry, Vol. 19, Núm. 6, pp. 728-737

  2. Evaluation of several pneumatic micronebulizers with different designs for use in ICP-AES and ICP-MS. Future directions for further improvement

    Analytical and Bioanalytical Chemistry, Vol. 379, Núm. 5-6, pp. 888-899

  3. Study of direct injection in ICP-AES using a commercially available micronebulizer associated with a reduced length torch

    Journal of Analytical Atomic Spectrometry, Vol. 19, Núm. 10, pp. 1347-1353

  4. Towards total-consumption pneumatic liquid micro-sample-introduction systems in ICP spectrochemistry

    Analytical and Bioanalytical Chemistry, Vol. 378, Núm. 1, pp. 57-59

2003

  1. Optimization of the evaporation cavity in a torch integrated sample introduction system based ICP-AES system. Applications to matrix and transient effects, analysis of microsamples and analysis of certified solid samples

    Journal of Analytical Atomic Spectrometry, Vol. 18, Núm. 10, pp. 1185-1191