Argitalpenak (15) JOSE ANTONIO JOFRE RECHE argitalpenak

2019

  1. Different compatibility approaches to improve the thermal and mechanical properties of EVA/starch composites

    Polymer Composites, Vol. 40, Núm. 8, pp. 3242-3253

2018

  1. Characterization of the chemical structure of vinyl ester resin in a climate chamber under different conditions of degradation

    Polymer Degradation and Stability, Vol. 153, pp. 88-99

  2. Effect of adding different amounts of graphite nanoplatelets on structural, thermal, mechanical and viscoelastic properties of vinylester based composites cured at 25°C

    Polymer Composites, Vol. 39, pp. E1381-E1390

  3. Structure and adhesion properties before and after hydrolytic ageing of polyurethane urea adhesives made with mixtures of waterborne polyurethane dispersions

    International Journal of Adhesion and Adhesives, Vol. 85, pp. 165-176

  4. Thermal, mechanical, and viscoelastic properties of recycled poly(ethylene terephthalate) fiber-reinforced unsaturated polyester composites

    Polymer Composites, Vol. 39, Núm. 5, pp. 1682-1693

2017

  1. Improvement in adhesion, abrasion resistance, and aging of polyurethane coatings prepared with polycarbonate diol for internal pipelines

    Journal of Materials in Civil Engineering, Vol. 29, Núm. 10

  2. Structural characterization of polyurethane ureas and waterborne polyurethane urea dispersions made with mixtures of polyester polyol and polycarbonate diol

    Progress in Organic Coatings, Vol. 112, pp. 141-152

2016

  1. Increased adhesion of polydimethylsiloxane (PDMS) to acrylic adhesive tape for medical use by surface treatment with an atmospheric pressure rotating plasma jet

    Journal of Physics D: Applied Physics, Vol. 49, Núm. 33

  2. Surface treatment of polydimethylsiloxane (PDMS) with atmospheric pressure rotating plasma jet. Modeling and optimization of the surface treatment conditions

    Plasma Processes and Polymers, Vol. 13, Núm. 4, pp. 459-469

2015

  1. Use of statistical design of experiments in the optimization of Ar-O 2 low-pressure plasma treatment conditions of polydimethylsiloxane (PDMS) for increasing polarity and adhesion, and inhibiting hydrophobic recovery

    Applied Surface Science, Vol. 332, pp. 1-11

  2. Dispersiones acuosas de poliuretano: potencial como adhesivos y recubrimientos

    Revista de plásticos modernos: Ciencia y tecnología de polímeros, Vol. 110, Núm. 704

  3. Influence of post-curing temperature on the structure, properties, and adhesion of vinyl ester adhesive

    Journal of Adhesion Science and Technology, Vol. 29, Núm. 6, pp. 518-531

  4. Role of the interactions between carbonate groups on the phase separation and properties of waterborne polyurethane dispersions prepared with copolymers of polycarbonate diol

    Progress in Organic Coatings, Vol. 88, pp. 199-211

2013

  1. Coatings prepared from waterborne polyurethane dispersions obtained with polycarbonates of 1,6-hexanediol of different molecular weights

    Progress in Organic Coatings, Vol. 76, Núm. 10, pp. 1484-1493

  2. Selective surface modification of ethylene-vinyl acetate and ethylene polymer blend by UV-ozone treatment

    International Journal of Adhesion and Adhesives, Vol. 43, pp. 42-53