Publicaciones (43) Publicaciones en las que ha participado algún/a investigador/a

2024

  1. A Logic-Based Implementation of the LP/NLP Branch and Bound Algorithm

    Computer Aided Chemical Engineering, Vol. 53, pp. 3415-3420

  2. Analysis and removal of bisphenols in recycled plastics using polyethylene glycol

    Scientific Reports, Vol. 14, Núm. 1

  3. Analysis of Calcium Carbonate Scales in Water Distribution Systems and Influence of the Electromagnetic Treatment

    Water (Switzerland), Vol. 16, Núm. 11

  4. Assessment of brine discharges dispersion for sustainable management of SWRO plants on the South American Pacific coast

    Marine Pollution Bulletin, Vol. 207

  5. Behavior of PCDD/Fs and PCBs from Wastewater Treatment Plants during Sewage Sludge Composting: Study of Semi-Anaerobic Conditions and Different Stages of the Process

    Water (Switzerland), Vol. 16, Núm. 11

  6. Biogas-based electricity production from landfills in places of irregular disposal: Overview for the southeast region of Brazil

    Energy, Vol. 290

  7. Decomposition methods applied to the design of large-scale CO2 supply chains

    Computer Aided Chemical Engineering (Elsevier B.V.), pp. 3265-3270

  8. Development of Antibacterial Thermoplastic Starch with Natural Oils and Extracts: Structural, Mechanical and Thermal Properties

    Polymers, Vol. 16, Núm. 2

  9. Early Biological Response to Poly(ε-Caprolactone)/Alumina-Toughened Zirconia Composites Obtained by 3D Printing for Peri-Implant Application

    Polymers, Vol. 16, Núm. 17

  10. Effect of alkaline catalysts on the valorization of sugarcane bagasse via pyrolysis

    Industrial Crops and Products, Vol. 211

  11. Effect of electromagnetic treatment combined with chlorination on water quality in sea lion recreational pools

    Case Studies in Chemical and Environmental Engineering, Vol. 10

  12. Efficacy of a Solution Containing 33% Trichloroacetic Acid and Hydrogen Peroxide in Decontaminating Machined vs. Sand-Blasted Acid-Etched Titanium Surfaces

    Journal of Functional Biomaterials, Vol. 15, Núm. 1

  13. Efficient use of energy in distillation: Advancing towards the electrification of the chemical industry

    Computer Aided Chemical Engineering (Elsevier B.V.), pp. 103-108

  14. Evaluation of Additives on the Cell Metabolic Activity of New PHB/PLA-Based Formulations by Means of Material Extrusion 3D Printing for Scaffold Applications

    Polymers, Vol. 16, Núm. 19

  15. Exceptional performance of Fe@carbon-rich nanoparticles prepared via hydrothermal carbonization of oil mill wastes for H2S removal

    Chemosphere, Vol. 358

  16. Exploring expert perceptions towards emerging pollutants and their impacts in reused wastewater and agriculture

    Agricultural Water Management, Vol. 304

  17. Fracture strength of 3-units fixed partial dentures fabricated with metal-ceramic, graphene doped PMMA and PMMA before and after ageing: An in-vitro study

    Journal of Dentistry, Vol. 142

  18. From power to heat: Strategies for electrifying distillation for sustainable chemical processes

    Applied Thermal Engineering, Vol. 257

  19. Graphical User Interfaces (GUIs) for Helping the Thermodynamic Analysis of Phase Equilibrium Data Correlation Results

    VII Congreso de Innovación Docente en Ingeniería Química (CIDIQ 2024). Área temática: T3. Herramientas informáticas en la formación/enseñanza en Ingeniería Química (#40)

  20. Hybrid analytical surrogate-based process optimization via Bayesian symbolic regression

    Computers and Chemical Engineering, Vol. 182