Publications (27) MARIO RAUL CACCIA publications

2024

  1. A scalable near-net-shape process for producing ultra-high-temperature carbide/refractory metal composite plates with tailorable channel patterns for compact heat exchangers for efficient electricity production

    Ceramics International

  2. Enhancement of CO2 Adsorption Kinetics onto Carbon by Low-Frequency High Amplitude Resonant Vibrations

    Carbon Trends, Vol. 15

2023

  1. Fracture behavior of a melt-infiltration-processed SiC/Si composite at 900 °C in argon, air, and steam

    Journal of the European Ceramic Society, Vol. 43, Núm. 2, pp. 224-234

  2. Residual elastic strain evolution due to thermal cycling of a ceramic-metal composite (WC-Cu) via high energy X-ray diffraction and analytical modeling

    International Journal of Refractory Metals and Hard Materials, Vol. 110

2022

  1. The importance of maldistribution matching for thermal performance of compact heat exchangers

    Applied Energy, Vol. 324

  2. Tuning Activity and Selectivity in Catalyzed Reactions of Environmental and Industrial Importance with a High-Surface Area, Mesoporous Mo2C Catalyst

    Chemistry of Materials, Vol. 34, Núm. 14, pp. 6232-6239

  3. Validation of the Porous Medium Approximation for Hydrodynamics Analysis in Compact Heat Exchangers

    Journal of Fluids Engineering, Transactions of the ASME, Vol. 144, Núm. 8

2021

  1. Complex-shaped, finely-featured ZrC/W composites via shape-preserving reactive melt infiltration of porous WC structures fabricated by 3D ink extrusion

    Additive Manufacturing Letters, Vol. 1

  2. Corrosion of Al2O3/Cr and Ti2O3/Cr composites in flowing air and CO2 at 750°C

    Corrosion Science, Vol. 179

  3. Corrosion of a dense, co-continuous SiC/Si composite in CO2 and synthetic air at 750 °C

    Journal of Materials Research and Technology, Vol. 15, pp. 4852-4859

  4. Design of a 2 MW ZrC/W-based molten-salt-to-sCO2 PCHE for concentrated solar power

    Applied Energy, Vol. 300

2020

  1. On the effects of hot spot formation during MW-assisted synthesis of Cf/SiC composites by reactive melt infiltration: Experimental simulations through high temperature treatments

    Journal of the European Ceramic Society, Vol. 40, Núm. 1, pp. 28-35

  2. Synthesis of high-surface area mesoporous SiC with hierarchical porosity for use as catalyst support

    Journal of the American Ceramic Society, Vol. 103, Núm. 10, pp. 5966-5977

2019

  1. Key parameters in the manufacture of SiC-based composite materials by reactive melt infiltration

    Materials, Vol. 12, Núm. 15

2018

  1. Ceramic–metal composites for heat exchangers in concentrated solar power plants

    Nature, Vol. 562, Núm. 7727, pp. 406-409

  2. Effect of vacuum on microstructure and mechanical properties of silicon carbide produced by reactive infiltration

    Ceramic Transactions, Vol. 263, pp. 323-331

  3. Graphene Translucency and Interfacial Interactions in the Gold/Graphene/SiC System

    Journal of Physical Chemistry Letters, Vol. 9, Núm. 14, pp. 3850-3855

  4. Manufacture of SiC/ZrSi2 composite materials: Assessing thermal compatibility between matrix and reinforcement

    Ceramic Transactions, Vol. 263, pp. 75-84

  5. Reactive melt infiltration as synthesis route for enhanced SiC/CoSi2 composite materials for advanced armor systems

    Ceramics International, Vol. 44, Núm. 11, pp. 13182-13190

  6. Synthesis of carbon monoliths with a tailored hierarchical pore structure for selective CO2 capture

    Journal of CO2 Utilization, Vol. 26, pp. 36-44