FRANCISCO
RODRIGUEZ REINOSO
Forscher in der Zeit 1964-2014
FRANCISCO JAVIER
NARCISO ROMERO
CATEDRATICO/A DE UNIVERSIDAD
Publikationen, an denen er mitarbeitet FRANCISCO JAVIER NARCISO ROMERO (27)
2017
-
Porosity effect on thermal properties of Al-12 wt % Si/graphite composites
Materials, Vol. 10, Núm. 2
2016
-
Effects of infiltration pressure on mechanical properties of Al-12Si/graphite composites for piston engines
Composites Part B: Engineering, Vol. 91, pp. 441-447
2010
-
Manufacture of biomorphic sic components with homogeneous properties from sawdust by reactive infiltration with liquid silicon
Journal of the American Ceramic Society, Vol. 93, Núm. 4, pp. 1003-1009
2009
-
The combined effect of porosity and reactivity of the carbon preforms on the properties of SiC produced by reactive infiltration with liquid Si
Carbon, Vol. 47, Núm. 9, pp. 2200-2210
-
The role of carbon biotemplate density in mechanical properties of biomorphic SiC
Journal of the European Ceramic Society, Vol. 29, Núm. 3, pp. 465-472
2008
-
Decreasing the infiltration threshold pressure of Al-12 wt% Si into alumina particle compacts by Sn or Pb layers
Composites Science and Technology, Vol. 68, Núm. 1, pp. 75-79
-
Pore filling in graphite particle compacts infiltrated with Al-12 wt.%Si and Al-12 wt.%Si-1 wt.%Cu alloys
Materials Science and Engineering A, Vol. 495, Núm. 1-2, pp. 276-281
-
Preparation of graphite/nano-SiC composites by co-pyrolysis of a petroleum residue with phenylsilanes
Journal of Analytical and Applied Pyrolysis, Vol. 83, Núm. 1, pp. 137-144
-
Wetting and capillarity in the Sn/graphite system
Materials Science and Engineering A, Vol. 495, Núm. 1-2, pp. 187-191
2007
-
Infiltration of graphite preforms with Al-Si eutectic alloy and mercury
Scripta Materialia, Vol. 56, Núm. 11, pp. 991-994
-
Reducing threshold pressure for infiltration of AM 2Sl alloys into carbon particle compacts by placing a thin layer of sn at the infiltration front
Materials Science Forum
2006
-
Characterization of lightweight graphite based composites using X-ray microtomography
Advanced Engineering Materials, Vol. 8, Núm. 6, pp. 491-495
-
Pressure infiltration of Al-12 wt.% Si-X (X = Cu, Ti, Mg) alloys into graphite particle preforms
Acta Materialia, Vol. 54, Núm. 7, pp. 1821-1831
2005
-
Pressure infiltration of Al-Si alloys into compacts made of carbon particles
Journal of Materials Science
2004
-
Synthesis of mixed disilicides/SiC composites by displacement reaction between metal carbides and silicon
Materials Science and Engineering A, Vol. 380, Núm. 1, pp. 62-66
2003
-
Effect of boron carbide particle addition on the thermomechanical behavior of carbon matrix silicon carbide particle composites
Carbon, Vol. 41, Núm. 5, pp. 1096-1099
2001
-
Materiales compuestos de carbón/SiC: Efecto del grado de carbonización de la matriz
Actas de la VI Reunión del Grupo Español del Carbón
2000
-
Synthesis of a (MoSi2, Mo5Si3)/SiC composite using an in situ solid-state displacement reaction between Mo2C and Si
Journal of the Ceramic Society of Japan, Vol. 108, Núm. 11, pp. 957-959
1999
-
Influence of the carbon material on the synthesis of silicon carbide
Carbon, Vol. 37, Núm. 11, pp. 1771-1778
1998
-
Fabrication of ceramic/ceramic composites from aluminum/ceramic composites produced by pressure infiltration
Scripta Materialia, Vol. 38, Núm. 4, pp. 623-629