Publicaciones en colaboración con investigadores/as de Universidad Politécnica de Valencia (28)

2020

  1. Concrete for precast blocks: Binary and ternary combination of sewage sludge ash with diverse mineral residue

    Materials, Vol. 13, Núm. 20, pp. 1-19

2014

  1. Blending of industrial waste from different sources as partial substitution of Portland cement in pastes and mortars

    Construction and Building Materials, Vol. 66, pp. 645-653

  2. Portland cement systems with addition of sewage sludge ash. application in concretes for the manufacture of blocks

    Journal of Cleaner Production, Vol. 82, pp. 112-124

2011

  1. Pozzolanic activity of a spent fluid catalytic cracking catalyst residue

    Advances in Cement Research, Vol. 23, Núm. 3, pp. 105-111

2010

  1. Durability properties of mortars partially substituted with spent catalytic cracking catalyst

    2nd International Conference on Sustainable Construction Materials and Technologies

  2. Durability properties of mortars partially substituted with spent catalytic cracking catalyst

    2nd International Conference on Sustainable Construction Materials and Technologies

  3. The effect of processed fly ashes on the durability and the corrosion of steel rebars embedded in cement-modified fly ash mortars

    Cement and Concrete Composites, Vol. 32, Núm. 3, pp. 204-210

2009

  1. Accelerated carbonation of cement pastes partially substituted with fluid catalytic cracking catalyst residue (FC3R)

    Cement and Concrete Composites, Vol. 31, Núm. 2, pp. 134-138

  2. Carbonation rate and reinforcing steel corrosion rate of OPC/FC3R/FA mortars under accelerated conditions

    Advances in Cement Research, Vol. 21, Núm. 1, pp. 15-22

  3. Characterisation and corrosion studies of steel electrodes covered by polypyrrole/phosphotungstate using Electrochemical Impedance Spectroscopy

    Progress in Organic Coatings, Vol. 66, Núm. 3, pp. 235-241

  4. Electrochemical and chemical characterization of polypyrrole/phosphotungstate coatings electrosynthesized on carbon steel electrodes in acetonitrile medium

    Synthetic Metals, Vol. 159, Núm. 17-18, pp. 1723-1730

  5. Improvement of the chloride ingress resistance of OPC mortars by using spent cracking catalyst

    Cement and Concrete Research, Vol. 39, Núm. 2, pp. 126-139

  6. The carbonation of OPC mortars partially substituted with spent fluid catalytic catalyst (FC3R) and its influence on their mechanical properties

    Construction and Building Materials, Vol. 23, Núm. 3, pp. 1323-1328

2008

  1. Chloride-induced corrosion of steel embedded in mortars containing fly ash and spent cracking catalyst

    Corrosion Science, Vol. 50, Núm. 6, pp. 1567-1575

  2. Effect of nitrite in corrosion of reinforcing steel in neutral and acid solutions simulating the electrolytic environments of micropores of concrete in the propagation period

    Corrosion Science, Vol. 50, Núm. 2, pp. 498-509

  3. Mechanical and physical properties of cement blended with sewage sludge ash

    Waste Management, Vol. 28, Núm. 12, pp. 2495-2502

2007

  1. Compatibility of fluid catalytic cracking catalyst residue (FC3R) with various types of cement

    Advances in Cement Research, Vol. 19, Núm. 3, pp. 117-124

  2. Corrosion of steel reinforcement in structural concrete with carbon material addition

    Corrosion Science, Vol. 49, Núm. 6, pp. 2557-2566

2006

  1. Electrochemical study of polypyrrole/ PW12 O403 - coatings on carbon steel electrodes as protection against corrosion in chloride aqueous solutions

    Corrosion Science, Vol. 48, Núm. 5, pp. 1122-1136

2005

  1. Steel corrosion and durability of calcium aluminate cement-reinforced mortars

    Corrosion, Vol. 61, Núm. 10, pp. 1004-1010