Publicaciones en colaboración con investigadores/as de Universidad Politécnica de Valencia (128)

2023

  1. Comparative effects of different real conditions in the microstructure and properties of ternary blended cement mortars for being used in rehabilitation works

    Developments in the Built Environment, Vol. 14

2022

  1. Microstructure and mechanical properties of ternary mortars with brick powder, glass powder, slag, fly ash, and limestone

    International Journal of Applied Ceramic Technology, Vol. 19, Núm. 4, pp. 2135-2147

  2. Structural health monitoring and NDT of masonry structures: Research and practice

    Construction and Building Materials

2021

  1. Effects after 1500 hardening days on the microstructure and durability-related parameters of mortars produced by the incorporation of waste glass powder as a clinker replacement

    Sustainability (Switzerland), Vol. 13, Núm. 7

  2. Effects of a real exposure class XC4 mediterranean climate environment in the behavior of mortars made using ternary binders with addition of slag, fly ash and limestone

    Materials, Vol. 14, Núm. 19

  3. FATIGUE ASSESSMENT OF OLD RIVETED RAILWAY BRIDGES: LABORATORY TESTING OF A REAL BRIDGE

    12TH INTERNATIONAL CONFERENCE ON STRUCTURAL ANALYSIS OF HISTORICAL CONSTRUCTIONS (SAHC 2021)

  4. Four-years influence of waste brick powder addition in the pore structure and several durability-related parameters of cement-based mortars

    Construction and Building Materials, Vol. 306

  5. Microstructure and durability performance of mortars with volcanic powder from calbuco volcano (Chile) after 4 hardening years

    Materials, Vol. 14, Núm. 7

  6. Microstructure, durability and mechanical properties of mortars prepared using ternary binders with addition of slag, fly ash and limestone

    Applied Sciences (Switzerland), Vol. 11, Núm. 14

  7. On the approximated solution of a special type of nonlinear third-order matrix ordinary differential problem

    Mathematics, Vol. 9, Núm. 18

  8. Performance of mortars made using ternary binders with addition of slag, fly ash and limestone exposed to a real environmental condition compatible with exposure class XC3

    Materials, Vol. 14, Núm. 20

  9. Unreinforced and TRM-Reinforced Masonry Building Subjected to Pseudodynamic Excitations: Numerical and Experimental Insights

    Journal of Engineering Mechanics, Vol. 147, Núm. 12

2020

  1. Concrete for precast blocks: Binary and ternary combination of sewage sludge ash with diverse mineral residue

    Materials, Vol. 13, Núm. 20, pp. 1-19

  2. The use of volcanic powder as a cement replacement for the development of sustainable mortars

    Applied Sciences (Switzerland), Vol. 10, Núm. 4

2019

  1. Cross-shore sediment transport quantification on depth of closure calculation from profile surveys

    Coastal Engineering, Vol. 151, pp. 64-77

  2. Experimental analysis of longitudinal shear between the web and flanges of T-beams made of fibre-reinforced concrete

    Engineering Structures, Vol. 196

  3. OMA identification on a scaled masonry building pre and post reinforced with TRM

    8th IOMAC - International Operational Modal Analysis Conference, Proceedings

  4. Parametric dynamic interaction assessment between bells and supporting slender masonry tower

    Mechanical Systems and Signal Processing, Vol. 129, pp. 235-249

2018

  1. DURABILITY OF REINFORCED CONCRETE STRUCTURES FOR ARCHITECTURE AND CIVIL ENGINEERING DEGREES: A LEARNING PROPOSAL

    12TH INTERNATIONAL TECHNOLOGY, EDUCATION AND DEVELOPMENT CONFERENCE (INTED)

  2. Drying-rewetting cycles in ordinary Portland cement mortars investigated by electrical impedance spectroscopy

    Construction and Building Materials, Vol. 187, pp. 954-963