Recycling of fresh concrete exceeding and wash water in concrete mixing plants

  1. Férriz Papí, Juan Antonio
Revista:
Materiales de construcción

ISSN: 0465-2746

Año de publicación: 2014

Volumen: 64

Número: 313

Tipo: Artículo

DIALNET GOOGLE SCHOLAR lock_openAcceso abierto editor

Otras publicaciones en: Materiales de construcción

Resumen

The exceeding concrete and washing equipment water are a matter to solve in concrete production. This paper explains several possibilities for recycling and analyses the products obtained with one recycling equipment. The objective of this work is to study the possibility to increase the percentage of recycling in new mixes. The developed study relates wash water density and fine particles content. Besides, mortar and concrete samples were tested introducing different quantities of these fine particles, substituting cement, sand or only as an addition. Consistency, compressive strength, setting time, absorption, and capillarity were tested. The results indicated an improvement of the studied properties in some percentages when substituting sand. It confirms the possibility to introduce larger quantities of wash water in new concrete mixes, with corrections in sand quantity depending on water density.

Referencias bibliográficas

  • Borger, J.; Carrasquillo, R.L.; Fowler, D.W. (1994) Use of recycled wash water and returned plastic concrete in the production of fresh concrete. Advanced Cement Based Materials, 1, 267–274. http://dx.doi.org/10.1016/1065-7355(94)90035-3
  • Ministry of Public Works: (2008) Instrucción de Hormigón Estructural (EHE-08). BOE, 203, 1–304.
  • Sandrolini, F.; Franzoni, E.: (2001) Waste wash water recycling in ready-mixed concrete plants. Cem. Concr. Res. 31, 485–489. http://dx.doi.org/10.1016/S0008-8846(00)00468-3
  • Paolini, M.; Khurana, R.: (1998) Admixtures for recycling of waste concrete. Cem. Concr. Comp. 20, 221–229. http://dx.doi.org/10.1016/S0958-9465(97)00066-8
  • Erdogˇdu, S¸. (2005) Effect of retempering with superplasticizer admixtures on slump loss and compressive strength of concrete subjected to prolonged mixing. Cem. Concr. Res. 33, 907–912. http://dx.doi.org/10.1016/j.cemconres.2004.08.020
  • Su, N.; Miao, B.; Liu, F. (2002) Effect of wash water and underground water on properties of concrete. Cem Concr. Res. 32, 777–782. http://dx.doi.org/10.1016/S0008-8846(01)00762-1
  • Chatveera, B.; Lertwattanaruk, P.; Makul, N. (2006) Effect of sludge water from ready-mixed concrete plant on properties and durability of concrete. Cem. Concr. Comp. 28, 441–450. http://dx.doi.org/10.1016/j.cemconcomp.2006.01.001
  • UNE-EN 933-1:2012 (2012) Ensayos para determinar las propiedades geométricas de los áridos. Parte 1: Determinación de la granulometría de las partículas. Método del tamizado.
  • UNE-EN 933-8:2012 (2012) Ensayos para determinar las propiedades geométricas de los áridos. Parte 8: Evaluación de los finos. Ensayo del equivalente de arena.
  • Evangelista, L.; de Brito, J. (2010) Durability performance of concrete made with fine recycled concrete aggregates. Cem. Concr. Comp. 32, [1] 9–14. http://dx.doi.org/10.1016/j.cemconcomp.2009.09.005
  • UNE-EN 196-1:2005 (2005) Métodos de ensayo de cementos. Parte 1: Determinación de resistencias mecánicas.
  • UNE-EN 1015-18:2003 (2003) Métodos de ensayo de los morteros para alba-ilería. Parte 18: Determinación del coeficiente de absorción de agua por capilaridad del mortero endurecido.
  • UNE-EN 1015-3:2000/A2:2007 (2007) Métodos de ensayo para morteros de alba-ilería. Parte 3: Determinación de la consistencia del mortero fresco (por la mesa de sacudidas).
  • UNE-EN 196-3:2005+A1:2009 (2009) Métodos de ensayo de cementos. Parte 3: Determinación del tiempo de fraguado y de la estabilidad de volumen.
  • UNE-EN 12350-2:2009 (2009) Ensayos de hormigón fresco. Parte 2: Ensayo de asentamiento.
  • UNE-EN 12390-3:2009/AC: (2011) Ensayos de hormigón endurecido. Part 3: Determinación de la resistencia a compresión de probetas.
  • Pereira, P.; Evangelista, L.; de Brito. J. (2012) The effect of superplasticizers on the mechanical performance of concrete made with fine recycled concrete aggregates. Cem. Concr. Comp. 34 [9], 1044–1052. http://dx.doi.org/10.1016/j.cemconcomp.2012.06.009
  • Katz, A. (2003) Properties of concrete made with recycled aggregate from partially hydrated old concrete. Cem. Concr. Res. 33, [5], 703–711. http://dx.doi.org/10.1016/S0008-8846(02)01033-5
  • Leite, M.B. (2001) Evaluation of the mechanical properties of concrete made with recycled aggregates from construction and demolition waste (en portugués), p. 270, PhD Thesis, Federal University of Rio Grande do Sul, Porto Alegre (Brazil).
Fuente de los datos: Dialnet