Fire-resistance, physical, and mechanical characterization of particleboard containing Oceanic Posidonia waste
ISSN: 0465-2746
Année de publication: 2014
Volumen: 64
Número: 314
Type: Article
D'autres publications dans: Materiales de construcción
Résumé
In this work, particleboards manufactured with Oceanic Posidonia waste and bonded with cement are investigated. The particleboards are made with 3/1.5/0.5 parts of cement per part of Posidonia waste. The physical properties of bulk density, swelling, surface absorption, and dimensional changes due to relative humidity as well as the mechanical properties of modulus of elasticity, bending strength, surface soundness, perpendicular tensile strength and impact resistance are studied. In terms of the above properties, the best results were obtained for particleboards with high cement content and when the waste �leaves� are treated (crushed) before board fabrication, due to internal changes to the board structure under these conditions. Based on the results of fire tests, the particleboard is non-flammable without any fire-resistant treatment.
Références bibliographiques
- García-Andreu, C.; Saval Pérez, J.M.; Frías Rojas, M.; Chinchón Yepes, S. (2008) Caracterización de las cenizas de Posidonia Oceánica para su utilización como material de construcción, Ingeniería Civil, 149, 131–141.
- García-Andreu, C.; Saval Pérez, J.M.; Chinchón Yepes, S. (2008) Análisis de las propiedades físicas y mecánicas de morteros de cemento con adición de cenizas de Posidonia Oceánica, Ingeniería Civil, 150, 89–102.
- Organización de las Naciones Unidas para la agricultura y alimentación. (2011) Situación de los bosques del mundo Roma. http://www.fao.org/docrep/013/i2000s/i2000s00.htm
- Guntekin, E.; Uner, B.; Sahin, T.T.; Karakus, B. (2008) Pepper stalks (Capsicum annuum) as a raw material for particleboard manufacturing, Journal of Applied Sciences, 8 [12], 2333–2336. http://dx.doi.org/10.3923/jas.2008.2333.2336
- Betkas, I.; Guler, C.; Kalaycioglu, H.; Mengeloglu, F.; Nacar, M. (2005) The Manufacture of Particleboards using Sunflower Stalks (helianthus annuus l.) And Poplar Wood (populus alba L.), Journal of Composite materials, 35 [5], 467–473
- Guntekin, E.; Karakus, B. (2008) Feasibility of using eggplant (Solanum melongena) stalks in the production of experimental particleboard, Industrial Crops and Products, 27 [3], 354–358. http://dx.doi.org/10.1016/j.indcrop.2007.12.003
- Yalinkilic, M.K.; Imamura, Y.; Takahashi, M.; Kalaycioglu, H.; Nemli, G.; Demirci, Z.; Ozdemir, T. (1998) Biological, physical and mechanical properties of particleboard manufactured from waste tea leaves. International Biodeterioration & Biodegradation, 41 [1], 75–84. http://dx.doi.org/10.1016/S0964-8305(98)80010-3
- Nemli, G.; Aydin, A. (2007) Evaluation of the physical and mechanical properties of particleboard made from the needle litter of Pinus pinaster Ait., Industrial Crops and Products, 26 [3], 252–258. http://dx.doi.org/10.1016/j.indcrop.2007.03.016
- Nemli, G.; Yildiz, S.; Gezer, E.D. (2008) The potential for using the needle litter of Scotch pine (Pinus sylvestris L.) as a raw material for particleboard manufacturing. Bioresource Technology, 99 [14], 6054–6058. http://dx.doi.org/10.1016/j.biortech.2007.12.044
- Güler, C.; Çöpür, Y.; Büyuksan, U, (2009) Producing particleboards from hazelnut (Corylus avellana L.) husk and European Black Pine (Pinus nigra Arnold), Wood Research, 54 [1], 125–132.
- Nemli, G.; Kirci, H.; Serdar, B.; Ay, N. (2003) Suitability of kiwi (Actinidia sinensis Planch.) prunings for particleboard manufacturing, Industrial Crops and Products, 17 [1], 39–46. http://dx.doi.org/10.1016/S0926-6690(02)00057-2
- Nemli, G.; Demirel, S.; Gümüskaya, E.; Aslan, M.; Acar, C. (2009) Feasibility of incorporating waste grass clippings (Lolium perenne L.) in particleboard composites, Waste Management, 29 [3], 1129–1131. http://dx.doi.org/10.1016/j.wasman.2008.07.011
- Wang, D.; Sun, X. (2002) Low density particleboard from wheat straw and corn pith, Industrial Crops and Products, 15 [1], 43–50. http://dx.doi.org/10.1016/S0926-6690(01)00094-2
- Sampathrajan, A.; Vijayaraghavan, N.C.; Swaminathan, K.R. (1992) Mechanical and thermal properties of particle boards made from farm residues, Bioresource Technology, 40 [3], 249–251. http://dx.doi.org/10.1016/0960-8524(92)90151-M
- UNE-EN 196-1 (2005) Cemento. Parte 1: Composición, especificaciones y criterios de conformidad de los cementos comunes.
- UNE 23727 (1990) Ensayos de reacción al fuego de los materiales de construcción. Clasificación de los materiales utilizados en la construcción.
- UNE EN 13501-1 (2002) Clasificación en función del comportamiento frente al fuego de los productos de construcción y elementos para la edificación. Parte 1: Clasificación a partir de datos obtenidos en ensayos de reacción al fuego.
- Espinoza-Herrera, R.; Cloutier, A. (2011) Physical and mechanical properties of gypsum particleboard reinforced with Portland cement, European Journal of Wood and Wood Products, 69 [2], 1247–254. http://dx.doi.org/10.1007/s00107-010-0434-x
- Kelly, M. (1997) Critical literature review of relationships between processing parameter and physical properties of particleboard, General Technical Report FPL 10, Madison, 64.
- Vital, B.; Lehmann, W.; Boone, R. (1974) How species and board densities affect properties of exotic hardwood particleboards, Forest Product Journal, 24 [12], 37–45.
- UNE-EN 312 (2004) Tableros partículas especificaciones.
- UNE-EN 622-1 (2004) Tableros fibras. Especificaciones. Parte 1: Requisitos generales.
- UNE-EN 300 (2007) Tableros de virutas orientadas (OSB). Definiciones, clasificación y especificaciones.
- González-Prieto, O.; Touza, M.C.; Pereiro, G. (2012) Caracterización de algunas propiedades en tableros de corteza de Pinus pinaster Ait. y tableros de vermiculita expandida, Informes de la Construcción, 64 [526]. 243–251. http://dx.doi.org/10.3989/ic.10.071