Publikationen (50) Publikationen, an denen Forscher/innen teilgenommen haben

2008

  1. A hybrid fluid catalytic cracking process for VGO/LDPE recycling: Influence of temperature and catalyst/feedstock ratio on gasoline yield

    CHISA 2008 - 18th International Congress of Chemical and Process Engineering

  2. An algorithm for the use of surrogate models in modular flowsheet optimization

    AIChE Journal, Vol. 54, Núm. 10, pp. 2633-2650

  3. Application of life cycle assessment to the structural optimization of process flowsheets

    Industrial and Engineering Chemistry Research, Vol. 47, Núm. 3, pp. 777-789

  4. Behavior of flexible poly(vinyl chloride)/poly(hydroxybutyrate valerate) blends

    Journal of Applied Polymer Science, Vol. 110, Núm. 4, pp. 2102-2107

  5. Broad-band electrical conductivity of high density polyethylene nanocomposites with carbon nanoadditives: Multiwall carbon nanotubes and carbon nanofibers

    Macromolecules, Vol. 41, Núm. 19, pp. 7090-7097

  6. Characterization of vacuum gas oil-low density polyethylene blends by thermogravimetric analysis

    Polymer Degradation and Stability, Vol. 93, Núm. 3, pp. 723-730

  7. Creación de una red para la elaboración de materiales docentes de Ingeniería Química

    Redes de Investigación Docente-Espacio Europeo de Educación Superior (Universidad de Alicante / Universitat d'Alacant), pp. 373-386

  8. Creación de una red para la elaboración de materiales docentes de Ingeniería Química

    Investigacions docents : del disseny curricular a les pràctiques d'aula: EEES 2007 (Instituto de Ciencias de la Educación), pp. 1-6

  9. Decomposition of paper wastes in presence of ceramics and cement raw material

    Chemosphere, Vol. 72, Núm. 2, pp. 306-311

  10. Degradation of LDPE/VGO mixtures to fuels using a FCC equilibrium catalyst in a sand fluidized bed reactor

    Applied Catalysis A: General, Vol. 341, Núm. 1-2, pp. 181-191

  11. Degradation of organic pollutants in Mediterranean forest soils amended with sewage sludge

    Chemosphere, Vol. 71, Núm. 11, pp. 2129-2138

  12. Differential scanning calorimetry analysis of the thermal treatment of ternary mixtures of ethylene vinyl acetate, polyethylene, and azodicarbonamide

    Journal of Applied Polymer Science, Vol. 110, Núm. 5, pp. 3217-3224

  13. Diffusion studies in polarized reverse osmosis processes by holographic interferometry

    Optics and Lasers in Engineering, Vol. 46, Núm. 12, pp. 877-887

  14. Diseño de un nuevo entorno basado en las TIC para el aprendizaje integral de materias científico-técnicas: Aplicación a la asignatura "Fundamentos de Operaciones de Separación"

    Redes de Investigación Docente-Espacio Europeo de Educación Superior (Universidad de Alicante / Universitat d'Alacant), pp. 417-428

  15. Durability of corona discharge and low-pressure air plasma-treated ethylene-vinyl acetate copolymers (EVAs)

    International Journal of Adhesion and Adhesives, Vol. 28, Núm. 1-2, pp. 38-46

  16. Evolution of products generated during the dynamic pyrolysis of LDPE and HDPE over HZSM5

    Energy and Fuels, Vol. 22, Núm. 5, pp. 2917-2924

  17. Evolution with the temperature of the compounds obtained in the catalytic pyrolysis of polyethylene over HUSY

    Industrial and Engineering Chemistry Research, Vol. 47, Núm. 18, pp. 6896-6903

  18. Flow properties of vacuum gas oil-low density polyethylene blends

    Fuel Processing Technology, Vol. 89, Núm. 1, pp. 83-89

  19. Formación de contaminantes y estudio cinético en la pirólisis y combustión de plásticos (PE, PVC y PCP)

    Taller Digital

  20. Homogeneity of the water + ethanol + toluene azeotrope at 101.3 kPa

    Fluid Phase Equilibria, Vol. 266, Núm. 1-2, pp. 8-13