Publicaciones (36) Publicaciones en las que ha participado algún/a investigador/a

2024

  1. A Logic-Based Implementation of the LP/NLP Branch and Bound Algorithm

    Computer Aided Chemical Engineering, Vol. 53, pp. 3415-3420

  2. Analysis and removal of bisphenols in recycled plastics using polyethylene glycol

    Scientific Reports, Vol. 14, Núm. 1

  3. Analysis of Calcium Carbonate Scales in Water Distribution Systems and Influence of the Electromagnetic Treatment

    Water (Switzerland), Vol. 16, Núm. 11

  4. Assessment of brine discharges dispersion for sustainable management of SWRO plants on the South American Pacific coast

    Marine Pollution Bulletin, Vol. 207

  5. Behavior of PCDD/Fs and PCBs from Wastewater Treatment Plants during Sewage Sludge Composting: Study of Semi-Anaerobic Conditions and Different Stages of the Process

    Water (Switzerland), Vol. 16, Núm. 11

  6. Biogas-based electricity production from landfills in places of irregular disposal: Overview for the southeast region of Brazil

    Energy, Vol. 290

  7. Development of Antibacterial Thermoplastic Starch with Natural Oils and Extracts: Structural, Mechanical and Thermal Properties

    Polymers, Vol. 16, Núm. 2

  8. Early Biological Response to Poly(ε-Caprolactone)/Alumina-Toughened Zirconia Composites Obtained by 3D Printing for Peri-Implant Application

    Polymers, Vol. 16, Núm. 17

  9. Effect of alkaline catalysts on the valorization of sugarcane bagasse via pyrolysis

    Industrial Crops and Products, Vol. 211

  10. Effect of electromagnetic treatment combined with chlorination on water quality in sea lion recreational pools

    Case Studies in Chemical and Environmental Engineering, Vol. 10

  11. Efficacy of a Solution Containing 33% Trichloroacetic Acid and Hydrogen Peroxide in Decontaminating Machined vs. Sand-Blasted Acid-Etched Titanium Surfaces

    Journal of Functional Biomaterials, Vol. 15, Núm. 1

  12. Evaluation of Additives on the Cell Metabolic Activity of New PHB/PLA-Based Formulations by Means of Material Extrusion 3D Printing for Scaffold Applications

    Polymers, Vol. 16, Núm. 19

  13. Exceptional performance of Fe@carbon-rich nanoparticles prepared via hydrothermal carbonization of oil mill wastes for H2S removal

    Chemosphere, Vol. 358

  14. Exploring expert perceptions towards emerging pollutants and their impacts in reused wastewater and agriculture

    Agricultural Water Management, Vol. 304

  15. Fracture strength of 3-units fixed partial dentures fabricated with metal-ceramic, graphene doped PMMA and PMMA before and after ageing: An in-vitro study

    Journal of Dentistry, Vol. 142

  16. From power to heat: Strategies for electrifying distillation for sustainable chemical processes

    Applied Thermal Engineering, Vol. 257

  17. Hybrid analytical surrogate-based process optimization via Bayesian symbolic regression

    Computers and Chemical Engineering, Vol. 182

  18. Impact of Bioplastic Design on Biodigestion Treatment

    Sustainability (Switzerland), Vol. 16, Núm. 16

  19. Impact of the COVID-19 lockdown to a port-city area: A two-year comparative PMF analysis of PM10 of polluting sources

    Atmospheric Environment, Vol. 319

  20. Improvement of multilayer plastic delamination using surface modification

    Resources, Conservation and Recycling, Vol. 202