ENGINYERIA QUÍMICA

2013

1. A new technique for recovering energy in thermally coupled distillation using vapor recompression cycles

   AIChE Journal, Vol. 59, Núm. 10, pp. 3767-3781

2. A review of thermochemical conversion of microalgae

   Renewable and Sustainable Energy Reviews, Vol. 27, pp. 11-19

3. Acción de soporte a la normalización en fabricación aditiva. Proyecto SASAM

   3c Tecnología: glosas de innovación aplicadas a la pyme, Vol. 2, Núm. 4, pp. 2

4. An alternative disjunctive optimization model for heat integration with variable temperatures

   Computers and Chemical Engineering, Vol. 56, pp. 12-26

5. Biodiesel production by transesterification of sludge in supercritical conditions

   Fuel, Vol. 109, pp. 427-431

6. Biogas from MSW landfill: Composition and determination of chlorine content with the AOX (adsorbable organically bound halogens) technique

   Energy, Vol. 63, pp. 161-167

7. CaSO4 solubility in water-ethanol mixtures in the presence of sodium chloride at 25°C. Application to a reverse osmosis process

   Fluid Phase Equilibria, Vol. 360, pp. 248-252

8. Characterization of soluble and bound EPS obtained from 2 submerged membrane bioreactors by 3D-EEM and HPSEC

   Talanta, Vol. 115, pp. 706-712

9. Conversion of low density polyethylene into fuel through co-processing with vacuum gas oil in a fluid catalytic cracking riser reactor

   Fuel Processing Technology, Vol. 113, pp. 130-140

10. Decomposition of two types of electric wires considering the effect of the metal in the production of pollutants

    Chemosphere, Vol. 91, Núm. 2, pp. 118-123

11. Distribution, morphology and habitats of saline wetlands: a case study from Monegros, Spain

    Geologica acta: an international earth science journal, Vol. 11, Núm. 4, pp. 371-388

12. Estrategias didácticas para la promoción de la química en la enseñanza secundaria y bachillerato

    Anales de Química de la RSEQ, Núm. 3, pp. 218-223

13. Ethylene vinyl acetate/nanoclay-based pigment composites: Morphology, rheology, and mechanical, thermal, and colorimetric properties

    Journal of Applied Polymer Science, Vol. 130, Núm. 4, pp. 2987-2994

14. Extensional viscosity measurements and characterization of poly (vinyl chloride-co-vinyl acetate) plastisols and foams

    Journal of Applied Polymer Science, Vol. 128, Núm. 1, pp. 354-362

15. Linear low-density polyethylene colored with a nanoclay-based pigment: Morphology and mechanical, thermal, and colorimetric properties

    Journal of Applied Polymer Science, Vol. 129, Núm. 5, pp. 2716-2726

16. Liquid-liquid, vapor-liquid, and vapor-liquid-liquid equilibrium data for the water- n-butanol-cyclohexane system at atmospheric pressure: Experimental determination and correlation

    Journal of Chemical and Engineering Data, Vol. 58, Núm. 12, pp. 3320-3326

17. Low temperature thermal degradation of PCDD/Fs in soil using nanosized particles of zerovalent iron and CaO

    Chemosphere, Vol. 91, Núm. 6, pp. 740-744

18. Mathematical programming model for heat exchanger design through optimization of partial objectives

    Energy Conversion and Management, Vol. 74, pp. 60-69

19. Multi-objective optimization of environmentally conscious chemical supply chains under demand uncertainty

    Chemical Engineering Science, Vol. 95, pp. 1-11

20. Nuevos Masterbatches respetuosos con el medio ambiente basados en cáscara de almendra en aplicaciones al Sector Juguetero y Mueble Auxiliar

    Revista de plásticos modernos: Ciencia y tecnología de polímeros, Núm. 685, pp. 283-287