Artikel (38) Publikationen, an denen Forscher/innen teilgenommen haben

2008

  1. An algorithm for the use of surrogate models in modular flowsheet optimization

    AIChE Journal, Vol. 54, Núm. 10, pp. 2633-2650

  2. Application of life cycle assessment to the structural optimization of process flowsheets

    Industrial and Engineering Chemistry Research, Vol. 47, Núm. 3, pp. 777-789

  3. Behavior of flexible poly(vinyl chloride)/poly(hydroxybutyrate valerate) blends

    Journal of Applied Polymer Science, Vol. 110, Núm. 4, pp. 2102-2107

  4. Broad-band electrical conductivity of high density polyethylene nanocomposites with carbon nanoadditives: Multiwall carbon nanotubes and carbon nanofibers

    Macromolecules, Vol. 41, Núm. 19, pp. 7090-7097

  5. Characterization of vacuum gas oil-low density polyethylene blends by thermogravimetric analysis

    Polymer Degradation and Stability, Vol. 93, Núm. 3, pp. 723-730

  6. Decomposition of paper wastes in presence of ceramics and cement raw material

    Chemosphere, Vol. 72, Núm. 2, pp. 306-311

  7. Degradation of LDPE/VGO mixtures to fuels using a FCC equilibrium catalyst in a sand fluidized bed reactor

    Applied Catalysis A: General, Vol. 341, Núm. 1-2, pp. 181-191

  8. Degradation of organic pollutants in Mediterranean forest soils amended with sewage sludge

    Chemosphere, Vol. 71, Núm. 11, pp. 2129-2138

  9. Differential scanning calorimetry analysis of the thermal treatment of ternary mixtures of ethylene vinyl acetate, polyethylene, and azodicarbonamide

    Journal of Applied Polymer Science, Vol. 110, Núm. 5, pp. 3217-3224

  10. Diffusion studies in polarized reverse osmosis processes by holographic interferometry

    Optics and Lasers in Engineering, Vol. 46, Núm. 12, pp. 877-887

  11. Durability of corona discharge and low-pressure air plasma-treated ethylene-vinyl acetate copolymers (EVAs)

    International Journal of Adhesion and Adhesives, Vol. 28, Núm. 1-2, pp. 38-46

  12. Evolution of products generated during the dynamic pyrolysis of LDPE and HDPE over HZSM5

    Energy and Fuels, Vol. 22, Núm. 5, pp. 2917-2924

  13. Evolution with the temperature of the compounds obtained in the catalytic pyrolysis of polyethylene over HUSY

    Industrial and Engineering Chemistry Research, Vol. 47, Núm. 18, pp. 6896-6903

  14. Flow properties of vacuum gas oil-low density polyethylene blends

    Fuel Processing Technology, Vol. 89, Núm. 1, pp. 83-89

  15. Homogeneity of the water + ethanol + toluene azeotrope at 101.3 kPa

    Fluid Phase Equilibria, Vol. 266, Núm. 1-2, pp. 8-13

  16. Incorporación de recursos naturales a formulaciones plásticas para la fabricación de juguetes

    Revista de plásticos modernos: Ciencia y tecnología de polímeros, Núm. 627, pp. 214-217

  17. Influence of the final "ageing" temperature on the regeneration behaviour and location of the coke obtained in the HZSM-5 and USY zeolites during the LDPE cracking

    Applied Catalysis A: General, Vol. 334, Núm. 1-2, pp. 20-25

  18. Influence of the temperature on the composition of the coke obtained in the catalytic cracking of low density polyethylene in the presence of USY and HZSM-5 zeolites

    Microporous and Mesoporous Materials, Vol. 109, Núm. 1-3, pp. 420-428

  19. Influence of transport parameters and chemical properties of the sediment in experiments to measure reactive transport in seawater intrusion

    Journal of Hydrology, Vol. 357, Núm. 1-2, pp. 29-41

  20. Influencia del tamaño de partícula del carbonato de calcio en la adhesión de copolímeros eva con carga

    Revista de plásticos modernos: Ciencia y tecnología de polímeros, Núm. 630, pp. 465-467