INGENIERIA QUIMICA

2006

1. Chapter 1 Types of carbon adsorbents and their production

   Interface Science and Technology, Vol. 7, Núm. C, pp. 1-47

2. DSC and TGA study of the transitions involved in the thermal treatment of binary mixtures of PE and EVA copolymer with a crosslinking agent

   Polymer, Vol. 47, Núm. 24, pp. 8194-8202

3. DSC study of transitions involved in thermal treatment of foamable mixtures of PE and EVA copolymer with azodicarbonamide

   Journal of Applied Polymer Science, Vol. 102, Núm. 3, pp. 2015-2025

4. Differences between carbon nanofibers produced using Fe and Ni catalysts in a floating catalyst reactor

   Carbon, Vol. 44, Núm. 8, pp. 1572-1580

5. Effect of residence time on volatile products obtained in the HDPE pyrolysis in the presence and absence of HZSM-5

   Industrial and Engineering Chemistry Research, Vol. 45, Núm. 26, pp. 8770-8778

6. Effect of temperature and organic nutrients on the biodegradation of linear alkylbenzene sulfonate (LAS) during the composting of anaerobically digested sludge from a wastewater treatment plant

   Waste Management, Vol. 26, Núm. 11, pp. 1237-1245

7. Effect of temperature on the biodegradation of linear alkylbenzene sulfonate and alcohol ethoxylate

   Journal of Surfactants and Detergents, Vol. 9, Núm. 1, pp. 69-75

8. Effects of linear alkylbenzene sulfonates (lass) in sewage sludge-amended soils on nutrient contents of broccoli plants

   Communications in Soil Science and Plant Analysis, Vol. 37, Núm. 15-20, pp. 2605-2614

9. Effects of linear alkylbenzene sulphonates (LASs) on exogenous organic matter content and evolution in sewage sludge-amended soils

   Communications in Soil Science and Plant Analysis, Vol. 37, Núm. 15-20, pp. 2615-2625

10. Estudio de la capa de polarización durante el proceso de ósmosis inversa: Equipo experimental para visualizar la formación de la capa

    Ingeniería química, Núm. 431, pp. 147-154

11. Fabricación rápida de moldes de inyección de plástico por electroerosión utilizando electrodos fabricados por sinterizado selectivo por láser y electrodeposición

    Revista de plásticos modernos: Ciencia y tecnología de polímeros, Núm. 605, pp. 445-449

12. Integration of generalized disjunctive programming with modular process simulators

    Computer Aided Chemical Engineering, Vol. 21, Núm. C, pp. 125-130

13. Kinetic model for the NOx reduction process by potassium containing coal char pellets at moderate temperature (350-450 °c) in the presence of O2 and H2O

    Fuel Processing Technology, Vol. 87, Núm. 5, pp. 429-436

14. Las nuevas tecnologías en el aprendizaje de materias científico-técnicas: Aplicación a la asignatura "Fundamentos de operaciones de separación"

    Ingenieria Quimica, Vol. 38, Núm. 438, pp. 153-160

15. Measurement of concentration profiles by holographic interferometry and modelling in unstirred batch reverse osmosis

    Industrial and Engineering Chemistry Research, Vol. 45, Núm. 21, pp. 7219-7231

16. Oxidative degradation of EVA copolymers in the presence of MCM-41

    Journal of Analytical and Applied Pyrolysis, Vol. 76, Núm. 1-2, pp. 138-143

17. Removal of linear alkylbenzene sulfonates and their degradation intermediates at low temperatures during activated sludge treatment

    Chemosphere, Vol. 64, Núm. 7, pp. 1157-1166

18. Simulation of the gas-assisted injection molding process using a mid-plane model of a contained-channel part

    Journal of Materials Processing Technology, Vol. 178, Núm. 1-3, pp. 350-357

19. Structural considerations and modeling in the synthesis of heat-integrated-thermally coupled distillation sequences

    Industrial and Engineering Chemistry Research, Vol. 45, Núm. 25, pp. 8454-8474

20. Study of the influence of the characteristics of different acid solids in the catalytic pyrolysis of different polymers

    Applied Catalysis A: General, Vol. 301, Núm. 2, pp. 222-231