Publicaciones (51) Publicaciones en las que ha participado algún/a investigador/a

2005

  1. Active oxygen from CeO2 and its role in catalysed soot oxidation

    Catalysis Letters, Vol. 99, Núm. 3-4, pp. 203-205

  2. Addition of ozone in the UV radiation treatment of a synthetic styrene-butadiene-styrene (SBS) rubber

    International Journal of Adhesion and Adhesives, Vol. 25, Núm. 4, pp. 358-370

  3. Addition of rosin acid during thermoplastic polyurethane synthesis to improve its immediate adhesion to PVC

    International Journal of Adhesion and Adhesives, Vol. 25, Núm. 1, pp. 31-38

  4. Adhesion of surface-treated EVA to polychloroprene adhesive containing different polyisocyanate content

    International Journal of Adhesion and Adhesives, Vol. 25, Núm. 3, pp. 201-209

  5. Adsorption properties of carbon molecular sieves prepared from an activated carbon by pitch pyrolysis

    Carbon, Vol. 43, Núm. 8, pp. 1643-1651

  6. Application of one-component primer to avoid the roughening of leather and increase its adhesion to polyurethane adhesive

    International Journal of Adhesion and Adhesives, Vol. 25, Núm. 4, pp. 320-328

  7. Atmospheric pressure studies of selective 1,3-butadiene hydrogenation on Pd single crystals: Effect of CO addition

    Journal of Catalysis, Vol. 235, Núm. 1, pp. 52-59

  8. Behaviour of activated carbons with different pore size distributions and surface oxygen groups for benzene and toluene adsorption at low concentrations

    Carbon, Vol. 43, Núm. 8, pp. 1758-1767

  9. Bimetallic catalysts for the simultaneous removal of NOx and soot from diesel engine exhaust: A preliminary study using intrinsic catalysts

    Catalysis Communications, Vol. 6, Núm. 4, pp. 263-267

  10. Carbon molecular sieves from hardwood carbon pellets. the influence of carbonization temperature in gas separation properties

    Microporous and Mesoporous Materials, Vol. 81, Núm. 1-3, pp. 161-167

  11. Characterization of waterborne polyurethane adhesives containing different amounts of ionic groups

    International Journal of Adhesion and Adhesives, Vol. 25, Núm. 6, pp. 507-517

  12. Combined SO2 and NOx removal at moderate temperature by a dual bed of potassium-containing coal-pellets and calcium-containing pellets

    Fuel Processing Technology, Vol. 86, Núm. 16, pp. 1745-1759

  13. Comparative characterization study of microporous carbons by HRTEM image analysis and gas adsorption

    Journal of Physical Chemistry B, Vol. 109, Núm. 31, pp. 15032-15036

  14. Contact adhesives

    Handbook of Adhesion: Second Edition (Wiley Blackwell), pp. 77-78

  15. Diario de un soldado: la batalla final contra la malaria

    Un breve viaje por la ciencia

  16. Effect of carbon fibres on the mechanical properties and corrosion levels of reinforced portland cement mortars

    Cement and Concrete Research, Vol. 35, Núm. 2, pp. 324-331

  17. Effects of temperature on pressure infiltration of liquid Al and Al-12wt.%Si alloy into packed SiC particles

    Scripta Materialia, Vol. 53, Núm. 12, pp. 1483-1488

  18. Electrochemical Regeneration of Activated Carbon Saturated with Toluene

    Journal of Applied Electrochemistry, Vol. 35, Núm. 3, pp. 319-325

  19. Enhanced soot oxidation by lattice oxygen via La3+-doped CeO2

    Journal of Catalysis, Vol. 230, Núm. 1, pp. 237-248

  20. Environmental friendly surface treatments of styrene-butadiene-styrene rubber: Alternatives to the solvent-based halogenation treatment

    International Journal of Adhesion and Adhesives, Vol. 25, Núm. 1, pp. 19-29