Articles (34) Publicacions en què ha participat algun/a investigador/a

2005

  1. Active oxygen from CeO2 and its role in catalysed soot oxidation

    Catalysis Letters, Vol. 99, Núm. 3-4, pp. 203-205

  2. Addition of ozone in the UV radiation treatment of a synthetic styrene-butadiene-styrene (SBS) rubber

    International Journal of Adhesion and Adhesives, Vol. 25, Núm. 4, pp. 358-370

  3. Addition of rosin acid during thermoplastic polyurethane synthesis to improve its immediate adhesion to PVC

    International Journal of Adhesion and Adhesives, Vol. 25, Núm. 1, pp. 31-38

  4. Adhesion of surface-treated EVA to polychloroprene adhesive containing different polyisocyanate content

    International Journal of Adhesion and Adhesives, Vol. 25, Núm. 3, pp. 201-209

  5. Adsorption properties of carbon molecular sieves prepared from an activated carbon by pitch pyrolysis

    Carbon, Vol. 43, Núm. 8, pp. 1643-1651

  6. Application of one-component primer to avoid the roughening of leather and increase its adhesion to polyurethane adhesive

    International Journal of Adhesion and Adhesives, Vol. 25, Núm. 4, pp. 320-328

  7. Atmospheric pressure studies of selective 1,3-butadiene hydrogenation on Pd single crystals: Effect of CO addition

    Journal of Catalysis, Vol. 235, Núm. 1, pp. 52-59

  8. Behaviour of activated carbons with different pore size distributions and surface oxygen groups for benzene and toluene adsorption at low concentrations

    Carbon, Vol. 43, Núm. 8, pp. 1758-1767

  9. Bimetallic catalysts for the simultaneous removal of NOx and soot from diesel engine exhaust: A preliminary study using intrinsic catalysts

    Catalysis Communications, Vol. 6, Núm. 4, pp. 263-267

  10. Carbon molecular sieves from hardwood carbon pellets. the influence of carbonization temperature in gas separation properties

    Microporous and Mesoporous Materials, Vol. 81, Núm. 1-3, pp. 161-167

  11. Characterization of waterborne polyurethane adhesives containing different amounts of ionic groups

    International Journal of Adhesion and Adhesives, Vol. 25, Núm. 6, pp. 507-517

  12. Combined SO2 and NOx removal at moderate temperature by a dual bed of potassium-containing coal-pellets and calcium-containing pellets

    Fuel Processing Technology, Vol. 86, Núm. 16, pp. 1745-1759

  13. Comparative characterization study of microporous carbons by HRTEM image analysis and gas adsorption

    Journal of Physical Chemistry B, Vol. 109, Núm. 31, pp. 15032-15036

  14. Effect of carbon fibres on the mechanical properties and corrosion levels of reinforced portland cement mortars

    Cement and Concrete Research, Vol. 35, Núm. 2, pp. 324-331

  15. Effects of temperature on pressure infiltration of liquid Al and Al-12wt.%Si alloy into packed SiC particles

    Scripta Materialia, Vol. 53, Núm. 12, pp. 1483-1488

  16. Electrochemical Regeneration of Activated Carbon Saturated with Toluene

    Journal of Applied Electrochemistry, Vol. 35, Núm. 3, pp. 319-325

  17. Enhanced soot oxidation by lattice oxygen via La3+-doped CeO2

    Journal of Catalysis, Vol. 230, Núm. 1, pp. 237-248

  18. Environmental friendly surface treatments of styrene-butadiene-styrene rubber: Alternatives to the solvent-based halogenation treatment

    International Journal of Adhesion and Adhesives, Vol. 25, Núm. 1, pp. 19-29

  19. Highly efficient catalysts for the hydrogenation of nitro-substituted aromatics

    Chemical Communications, pp. 2026-2028

  20. Influence of SO2 in the reduction of NOx by potassium-containing coal pellets

    Energy and Fuels, Vol. 19, Núm. 1, pp. 94-100